Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
theben
As of: Apr-06 (Subject to change without notice)
Page 3 of 36
1 Function
Properties
The RMG 8 EIB blinds and switch actuator and the RME 8 / RMX 4 extension modules can be used
as a
•
Drive controller
for blinds, roller shutters and sunshades, and as a
•
Switch actuator
, e.g. for lighting, ventilation and the like.
If used as a lighting controller, the individual channels of the RMG 8 and RME 8 / RMX 4 devices can
be parameterised:
•
As a
switch actuator
(on/off without delay)
•
As a
delay mechanism for on/off operations
(delay times can be individually set)
•
As a
pulsing function
(activation restricted by timeout)
•
As an automatic time switch for staircase lighting with cut out early warning
(after the preset
time has elapsed, the light is switched off temporarily (for 0.25 s) and then switched on again for
30s).
Several inhibit and control objects enable a remote control of the connected devices, e.g. central
raising or lowering of blinds/roller shutters/shading devices or central inhibiting of individual or all
switching channels.
Via three safety objects, sunshades or sight protection devices can be retracted/extended to a defined
position, for example in the case of a storm or rain.
The application software distinguishes between standard and expert users (refer to the chapter Expert
Application).
