Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
theben
As of: Apr-06 (Subject to change without notice)
Page 15 of 36
•
Object 44
Name
(refer to the overview)
Function
Drives central priority
Forced up/down (2-bit object)
The function corresponds to that of the Drives central object (see above) but
this object has the
highest priority
and overrides all the other objects for as
long as it is set.
Areas of application: e.g. when cleaning the windows, in the case of fire
fighting actions etc.
Recommendation: If used, always send cyclically.
Refer to the appendix Priority Order of the Drive Controller.
Data format:
- - - - - - X Y
1 = forced obj. active
0 = forced obj. inactive
1 = up
0 = down
•
Object 45
Name
(refer to the overview)
Function
Central permanent ON For controlling switching outputs.
Using this object, all the switching channels parameterised accordingly can
be controlled from one central point.
In this case, for example, all the lights on one floor with the highest priority
can be switched on simultaneously by pressing one button (refer to the
appendix Priority Order – Switching Output Controller).
•
Object 46
Name
(refer to the overview)
Function
Central permanent
OFF
For controlling switching outputs.
Using this object, all the switching channels parameterised accordingly can
be controlled from one central point.
In this case, for example, all the lights on one floor with the highest priority
can be switched off simultaneously by pressing one button (refer to the
appendix Priority Order – Switching Output Controller).
