PlanoSpot 360 DALI-2 S DE manual
3
1
General
1.1
Safety information
ATTENTION
Installation should only be carried out by a qualified electrician!
1.2
Proper use
The PlanoSpot 360 DALI-2 S is intended for indoor installation. It serves as a DALI-2 input
device and transmits the collected sensor data to the multi-master application controller.
The PlanoSpot 360 DALI-2 S is exclusively intended for use as contractually agreed between the
manufacturer and the user. Any other use is considered to be unacceptable. The manufacturer
does not accept liability for any resulting damages.
1.3
Explanation of terms
There is a difference between motion detectors and presence detectors. Motion detectors can
only detect large movements. Presence detectors, on the other hand, can detect even the
smallest of movements – those made while seated, for example. DALI-2 sensors can detect
both large and small movements and are therefore referred to as presence sensors. However,
the implementation of the motion detection function in line with IEC 62386 Part 303 is based on
the concept of a "movement based sensor".
This manual only describes operating mode 0x00.
