PlanoSpot 360 DALI-2 S DE manual
16
Operating mode
In its factory settings, the PlanoSpot 360 DALI-2 S is set to DALI-2 standard (operating mode
0x00).
The proprietary DALI mode 0x80 or 0x81 was used for older systems. If the PlanoSpot 360
DALI-2 S is to be integrated into such a system, the relevant operating mode – 0x80 or 0x81 –
can be selected. There is a separate manual for operating modes 0x80 and 0x81.
IR group address
The button instances of the PlanoSpot 360 DALI-2 S and the buttons on the user remote
controls are linked with each other via an IR group address. This means that adjacent PlanoSpot
360 DALI-2 S devices can be separated from each other.
The button instances of the PlanoSpot 360 DALI-2 S are only actuated if the IR group address of
the button instance matches that of the user remote control.
Users can choose from I, II, III, IV, V, VI, VII, VIII and All for the IR group addresses. In the case of
the PlanoSpot 360 DALI-2 S presence sensor, the "IR group address" parameters are assigned
to the following button instances:
•
IR group address A Button instance 6 and 7
•
IR group address B Button instance 8 and 9
•
IR group address C Button instance 10 and 11
•
IR group address D: Button instance 12
•
IR group address E: Button instance 13
Further information can be found in section 9.8 Button function.
LED display – no short address
If a PlanoSpot 360 DALI-2 S has not yet received a short address, this can be indicated via the
red LED. In order for this to happen, the parameter must be set to "
Permit flashing
", otherwise
it should be set to "Suppress flashing".
7.1.2
Control commands
Control command
Description
Can be
triggered
via
app
Can be
triggered via
theSenda P
Quiescent mode
On/Off
-
Presence test
On/Off
Restart
Restart sensor
DALI reset
Set DALI reset values
-
DALI default
Set DALI default values
-
Factory settings
(factory reset)
Reset device to factory settings.
-
Quiescent mode
If quiescent mode is activated, the PlanoSpot 360 DALI-2 S will not send any event telegrams to
the DALI bus. Quiescent mode has a time limit of 15 minutes.
