Theben 2030190, Руководство пользователя

Страница: 14 / 29

PlanoSpot 360 DALI-2 S DE manual 14
IR group
address B
IR group address button
instance 8–9
Range: I/
II
/III/ ../VIII/All
-

-
IR group
address C
IR group address button
instance 10–11
Range: I/II/
III / ../VIII/All
-

-
IR group
address D IR group address button
instance 12
Range: I/II/III/ ../VIII/
All
-  -
IR group
address E
IR group address button
instance 13
Range: I/II/III/ ../VIII/
All
-

-
LED display –
no short
address
Selection of LED display if no
short address is assigned
"
Permit flashing " /
"Suppress flashing"
-

-
Bold indicates default values / factory settings
Room correction factor / brightness measurement value
The room correction factor is a measurement for the difference between brightness measure-
ments on the ceiling and the work area. The brightness value on the ceiling is influenced by the
installation location, the incidence of light, the position of the sun, the weather conditions, as
well as the reflection properties of the room and the furniture.
With the room correction factor, the measured brightness value is adjusted to the conditions in
the room and in this way can be matched to the lux meter value (
1
) measured at the surface
beneath the PlanoSpot 360 DALI-2 S.
~1.5 m ~1.5 m
Illustration of the light measurement at table height
(0.8 m)
with an installation height of 2.5 m
1.0 x 1.8 m 0.8 x 1.6 m 1.0 x 1.8 m
Interior Middle Window
Brightness value on the ceiling
Room correction factor = -----------------------------------------
Brightness value on the work surface