PlanoSpot 360 DALI-2 S DE manual
4
2
Function description
The PlanoSpot 360 DALI-2 S devices are integrated into a higher-level system. Thanks to the
DALI-2 standard, a multi-master application controller from any manufacturer may be used.
This controller must support IEC 62386 Parts 101/103 and optionally – in order to use the
information regarding presence as well as brightness – Parts 303/304.
The PlanoSpot 360 DALI-2 S devices and other DALI components are connected to the DALI line.
The DALI supply is provided by the higher-level system. The assignment of the short addresses
and the selection of the required instances for the PlanoSpot 360 DALI-2 S devices are carried
out via the multi-master application controller.
After start-up, the PlanoSpot 360 DALI-2 S supply information regarding room occupancy and
motion detection as well as brightness values to the higher-level controller via the relevant
instances. The lighting and other systems in a building are controlled on the basis of this
information.
2.1
Overview of available instances
Instance
no.
Instance name
Instance
type
Standard
Memory bank
0
Occupancy sensor
Standard
detection zone
3
IEC 62386-303
2
1
Occupancy sensor
Reduced
detection zone
3
IEC 62386-303
2
2
Light sensor, integral
4
IEC 62386-304
3
3
Light sensor, interior
4
IEC 62386-304
4
4
Light sensor, middle
4
IEC 62386-304
5
5
Light sensor, window
4
IEC 62386-304
6
6 / 7
Push button on / off
1
IEC 62386-301
7
8 / 9
Push button on / off
1
IEC 62386-301
8
10 / 11
Push button on / off
1
IEC 62386-301
9
12
Push button scene 1
1
IEC 62386-301
10
13
Push button scene 2
1
IEC 62386-301
11
