Textron Stampede 900 2017, Руководство по ремонту и обслуживанию

Страница: 63 / 237

B
WEATHER PROTECTION
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
51
Repair and Service Manual
668061
Installing the Canopy
Fig. 4 Canopy
1. Align the mounting holes on the canopy with the
holes in the mounting brackets (4-7) and canopy
clamps (3) (Ref. Fig. 2) (Ref. Fig. 4).
2. Slide the canopy clamps (3) along the ROPS tube so
they are aligned with the canopy mounting holes.
3. When the canopy clamps are aligned with the can-
opy mounting holes, tighten the canopy clamp bolts
(11) to 7 - 9 ft. lbs. (10 - 12 N-m) torque.
4. Secure the canopy to the clamps and brackets with
Torx bolts (10), washer (13), rubber washer (14) and
lock nuts (9).
5. Finger tighten hardware to allow for adjustment.
After all hardware has been installed, tighten to a
torque of 13 - 15 ft. lbs. (17 - 20 N-m).
6. Tighten all ROPS hardware to 30 - 33 ft. lbs. (40 - 45
N-m) torque.
7. Removal of the canopy is in the reverse order of
installation.
13
14
3
4
6
9
10
Front of Vehicle