Textron Stampede 900 2017, Руководство по ремонту и обслуживанию

Страница: 53 / 237

B
ROLLOVER PROTECTION SYSTEM
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
41
Repair and Service Manual
668061
a. Tighten the seat back support (24, 25) to ROPS
tubes (2, 1) and the vehicle frame.
b. Tighten the ROPS tubes (1, 2) and extended cab
ROPS tubes (3, 4) to the vehicle frame.
c. Tighten the front cross-tube (5), rear cross-tube
(6), and extended cab cross-tube (7) to the side
ROPS tubes (1 - 4).
SEATBELT INSTALLATION
Tool List Qty.
Socket, 7/16” ............................................................... 1
Ratchet ........................................................................ 1
Wrench, 7/16”.............................................................. 1
Torque Wrench, ft. lbs. ................................................ 1
1.
Attach the top of the seatbelt to the mounting bracket
at the top of the ROPS tube (2) with bolt (16) from
the front to back (Ref. Fig. 8). Secure with lock nut
(15). Guide the belt down to prevent twisting the belt.
Make sure the flat side of the seatbelt retractor is
flush against the bracket toward the front of the vehi-
cle.
2. Attach the seatbelt retractor to the bracket at the bot-
tom of the ROPS tube (2) (Ref. Fig. 9).
3. Insert the tab on the back of the seatbelt retractor
through the corresponding hole in the bracket to pre-
vent the retractor from rotating.
4. Secure the seatbelt retractor to the bracket by insert-
ing bolt (18) through the mounting hole in the retrac-
tor and through the ROPS tube (2). Secure the bolt
with lock nut (19).
5. Secure the bottom of the seat belts to the seat frame
with bolts (27) and nuts (28) (Ref. Fig. 10).
6. Secure the seat belt latches (5) to the center of the
seat frame with bolts (8) and nuts (9).
7. Tighten hardware to the torque specified below:
Fig. 8 Seat Belt
Fig. 9 Seat Belt Retractor
ITEM NO TORQUE SPECIFICATION
18, 19 48 - 52 ft.lbs. (65 - 71 Nm)
15, 16 48 - 52 ft.lbs. (65 - 71 Nm)
27, 28
44 - 55
ft.lbs. (60 - 75 Nm)
8, 9
48 - 52 ft.lbs. (65 - 71 Nm)
Front of Vehicle
Mounting
Bracket
2
15
16
Seatbelt
Retractor
19
2
18
Front of Vehicle