8-3. Confirming the Step No. and the Step Being Executed
The step No. and step being executed can be confirmed while the STEP LED is lit in green.
8-3-1. Confirming the step No. while the sequence program is stopped
Operation procedure
1. Press the STEP key when the STOP key is lit in
amber (while the sequence program is stopped).
The STEP key is then lit in green.
The voltage indicator displays "no".
The current indicator displays the step No.
2. Turn the rotary encoder to change the step No.
Only the step numbers from start step to end
step are displayed.
8-3-2. Confirming the step No. being executed during sequence program execution
Operation procedure
1. Press the STEP key while the PAUSE key or
START key is lit in amber (while a sequence
program is being executed).
The STEP key is then lit in green.
The voltage indicator displays the number of
executed program cycles, and the direction in
which the program is being executed.
The current indicator displays the step No. being
executed.
The figure on the left indicates that the program
is in the 3
rd
execution cycle, from the start step to
the end step, and that step 31 is being executed.
The maximum number of execution cycles for a
sequence program is "999".
The 1000
th
cycle is displayed as "0".
Step execution direction
Start step
Æ
End step
Step execution direction
End step
Æ
Start step
52
52
