6-2. Outout Off Timer
This function is used to automatically turn off the output after a preset amount of time has passed since the
output was turned on.
6-2-1. Setting the output off timer
Operation procedure
1. Turn the output off, then repeatedly press the
MENU key until the current indicator displays
"* *.oF".
The MENU key is then lit in green, and the
ESC/KEY LOCK key and the ENTER/MEM key
start blinking green.
2. Press the DIGIT keys
W
X
to select the digit to
be modified. Only the digit that is blinking can
be modified.
Press the DIGIT keys
W
X
a few times to move
the blinking digit from the voltage indicator to the
current indicator.
3. Use the rotary encoder to specify the desired
setting.
The hours are set in the voltage indicator, and
the minute are defined in the current indicator.
In the left figure, the output off timer is set for 2
hrs. and 20 min.
The timer range is from 1 min. to 1000 hrs. and
59 min, and can be adjusted in 1 min. increments.
Specifying 0 min. for the timer deactivates the
output off timer function.
4. Press the green-blinking ENTER/MEM key to
enter the setting.
After the setting is entered, the current indicator
stops blinking, remains lit for a short while, and
then starts blinking again.
5. Press the green-blinking ESC/KEY LOCK key to
exit.
Normal operation of the unit is then available.
This setting must be specified while the output is off.
31
31
