8-2. Sequence Programs
A sequence program consists of the settings for each step, and the step execution settings.
8-2-1. Step No. and setting items
There are 1000 steps. The following items must be specified for each step.
STEP 1
STEP 1000
Step setting items:
・
Set voltage
・
Step execution time
(
＊＊
hr,
＊＊
min,
＊＊
sec,
＊＊＊
m.sec)
・
Pause ON/OFF
・
Set current
・
Output on/off/Hi-r off
・
OVP
・
UVP
・
OCP
・
cc-P ON/OFF
8-2-2. Setting step execution
The step execution range is from "start step" to "end step".
The number of execution cycles can be from 1 to 1000, or infinite.
There are four execution modes available. Select the desired mode.
Start step
Set step from 1 to 1000
End step
Set step from 1 to 1000
Number of execution cycles: 1 to 1000, or infinite
The selected execution mode is repeated, with the setting items for each
step being implemented.
Execution: 4 modes
0: Start step
1: Start step
2: End step
3: End step
End step
End step
Start step
Start step
Start step
End step
End step
Start step
51
51
