6-4. Specifying Settings when the Power Is Turned On
6-4-1. Recalling preset values when the power is turned on
The voltage and current values can be set when the power is turned on.
The voltage and current values that can be selected are the set values from when power was last turned off, and the data
stored in PRESET keys 1, 2, and 3.
Operation procedure
1. Turn on the power switch while pressing and
holding the MENU key.
Release the MENU key when the panel is lit.
The MENU key is then lit in green, and the
ESC/KEY LOCK key and the ENTER/MEM key
start blinking green.
The function name is displayed in the voltage
indicator, and the function setting is displayed
(blinking) in the current indicator.
2. Repeatedly press the MENU key until "PrSt" is
displayed in the current indicator.
3. Turning the rotary encoder displays the following.
Select the values you want to recall.
The set values from when the
power last turned off.
The values stored in the
PRESET 1 key.
The values stored in the
PRESET 2 key.
The values stored in the
PRESET 3 key.
4. Press the green-blinking ENTER/MEM key to
enter the setting.
After the setting is entered, the current indicator
stops blinking, remains lit for a short while, and
then starts blinking again.
A
V
W
W
5. Press the green-blinking ESC/KEY LOCK key to
exit. The message shown in the figure on the
left appears. Normal operation of the unit is
then available.
Turn the power switch off and then back on to
reflect the selected PRESET values.
34
34
