11-3-33. Reading out a sequence program (XSREAD)
nc
This command requests a sequence program.
Query XSREAD
？
Requests seque e program data.
Response
6,x7,x8,x9,x10
0
Output off & discharge circuit off
x8: D
m/ss/aaa
ause
XSREAD
x1,x2,x3,x4,x5,x
x1: STEP No. 1 - 100
x2: Set voltage value
x3: Set current value
x4: Set OVP value
x5: Set UVP value
x6: Set OCP value
x7: Output 0: Off; 1: On; 2:
uration hh/m
hh : Set hour
mm: Set minute
ss : Set second
aaa: Set m. second
x9: Pause settiing 0: No pause, 1: P
x10: CC priority mode 0: Off, 1: On
XSREAD 1,3.00,5.0
.0,0.0,10.0,1,0/0/10/500,0,0
0,10
STEP No.
: 1
Set voltage
: 3.0V
Set current
: 5.0A
Set OVP
: 10.0V
Set UVP
: 0.0V
Set OCP
A
: 10.0
Output :
ON
Duration
: 10.5 sec.
Pause
: No pause
Response example
CC priority mode : OFF
Remarks
Connection time is from 0/0/0/050 to 99/59/59/990.
11-3-34. Sequence start point setting (SSADR)
This command specifies the starting STEP No. of the sequence.
Setting
SSADR x1
x1: Specifies a number from 1 to 1000 as the starting STEP No.
of the sequence.
Application example SSADR 3
Sets STEP 3 as the start of the sequence.
Query
SSADR?
Queries the starting STEP of the sequence.
Response example
SSADR 5
Indicates the sequence is set to start at STEP 5.
Remarks
11-3-35. Sequence end point setting (SEADR)
This command specifies the ending STEP No. of the sequence.
Setting
SEADR x1
x1: Specifies a number from 1 to 1000 as the ending STEP No. of
the sequence.
Application example SEADR 3
Sets STEP 3 as the end of the sequence.
Query
SEADR?
Queries the ending STEP of the sequence.
Response example
SEADR 5
Indicates the sequence is set to end at STEP 5.
Remarks
93
93
