TEXIO PS-A Series, Инструкция по эксплуатации

Страница: 104 / 116

11-3-36. Sequence execution mode setting (SMODE)
This command selects the sequence execution mode.
decrease as the sequence.
s decrease as the sequence.
s decrease & increase as the sequence.
Setting SMODE x1 0: Sets increase as the sequence.
1: Sets increase &
2: Set
3: Set
Application example SM Sets increase as the sequence execution. ODE 0
Query SM Queries the sequence execution mode. ODE?
Response example SM Indicates increase has been set as the sequence execution mode. ODE 0
Remarks
Nu m the start STEP toward to the end STEP in increase mode and
de e mode.
mbers increase fro
crease from the end STEP toward to the start STEP in decreas
11-3-37. Sequence repeat cycle s LE)
This command specifies the n t a sequence cycle is repeated.
Setting SCYCL s a number from 0 to 1000 as the number of times the
ated.
the sequence cycle will be repeated infinitely.
etting (SCYC
umber of times tha
E x1 x1: Set
sequence cycle is repe
0 indicates that
Application example SC number of times the sequence cycle is repeated. YCLE 3 Sets 3 as the
Query SCYCLE? Queries the set number of times the sequence cycle is repeated.
Response example Indicates that 5 has been set as the number of times the
sequence cycle is repeated. SCYCLE 5
Remarks e executi de is increase & decrease, the phase from increase to
s conside one cycle.
If the sequenc
decrease i on mo
red to be
11-3-38. Sequence mode EQ)
This command switche ration mo peration mode.
Setting Q hes from panel operation mode to sequence mode.
setting (CHGS
s the ope de to sequence o
CHGSE Switc
Application example CHGSEQ
Remarks
11-3-39. Panel operation mode setting (CHGNORM)
ode. This command switches the operation mode to panel operation m
Setting CHGNORM Switches
from sequence mode to panel operation mode.
Application example CHGNORM
Remarks
11-3-40. t (SS
s the ex quence.
ART Starts the execution of the sequence.
Sequence star
and start
TART)
ecution of the se This comm
Setting
SST
Application example SSTART
Query SSTART? Queries the execution status of the sequence.
Response example SSTART 0 Indicates the s
SSTART 1
equence is not being executed.
Indicates the sequence is being executed.
Remarks If the unit is not in sequence m ued.
nce program ha d.
ode, an error will be iss
If no seque s been registered, commands will be ignore
11-3
(
and stops the sequence.
Setting SSTOP Stops the sequence.
-41. Sequence stop SSTOP)
This comm
Application example SSTOP
Query SSTOP? Queries the execution status of the sequence.
Response example SSTOP 0
SSTOP 1 Indicates the sequence has not stopped.
Indicates the sequence has stopped.
Remarks If the unit is not in sequence mode, an error will be issued.
94 94