Operation procedure
4. Press the green-blinking ENTER/MEM key to
enter the setting.
After the setting is entered, the current indicator
stops blinking, remains lit for a short while, and
then starts blinking again.
5. Press the green-blinking ESC/KEY LOCK key to
exit. The message shown in the figure on the
left appears. Normal operation of the unit is
then available.
When the mode is changed, the following
message is displayed:
Press the green-blinking ENTER/MEM key to
restart the unit.
When the unit is configured to be the serial or
parallel slave unit, the display shown in the figure
on the left appears.
When this display appears, turn off the power
switch.
44
44
