Texas Instruments XDS522, Руководство по установке

Страница: 17 / 52

What You Need
1-3 Installing the XDS522/XDS522A Hardware
1.2 What You Need
To install the XDS522/XDS522A hardware, you need the following:
Host A 386, 486, or Pentium
t
PC
XDS51x emulator kit An XDS511 emulator, which includes
the components shown in Figure 1–2
on page 1-4
Printer cable If you are using the XDS510PP, a print-
er cable (see Figure 1–2 on page
1-4)
Device configuration
kit A device configuration kit, which in-
cludes a ’C8, ’C16, or ’C2xx SE device
and the target cable adapter board
(see Figure 1–3 on page 1-5)
XDS522 or XDS522A
emulation system kit XDS522 or XDS522A BTT chassis
XDS522 or XDS522A interface adapt-
er pod with woven cables
Provided external power supply (5 V
@ 5 A), including the power supply
adapter cord
See Figure 1–4 on page 1-5.
Minimizing Electrical Shock and Fire Hazard
To minimize the risk of electric shock and fire hazard, be sure that
all major components that you interface with Texas Instruments
devices are limited in energy and certified by one or more of the
following agencies: UL, CSA, VDE, or TUV.
Minimizing Static Shock
Special handling methods and materials should be used to prevent
equipment damage. You should be familiar with identification and
handling of ESD-sensitive devices before attempting to perform
the procedures described in this manual.