TESTO 330, Инструкция по эксплуатации

Страница: 64 / 84

6 Using the product
64
Options
> [Options] → Clipboard : Data are saved to the clipboard.
> [Options] → Delete clipboard : Any data saved to the clipboard
is deleted.
> [Options] → Save : The readings are saved in a record.
> [Options] → Adapter Information : Type and version of
readout adapter are displayed.
> [Options] → Identification : Information about manufacturer
and type of automatic furnace
> [Options] → Statistics : Display of error statistics.
Automatic furnaces are equipped with a circular buffer
memory: Error messages are overwritten when the error log
is full. The fault that has occurred last is at position 1 in the
error list.
> [Options] → Fault : Display of faults.
6.2.16. Solid fuel measurement
The solid fuel measurement program is only available with
instruments that come with the CO sensor (not COlow). For
measurements in accordance with the 1st Federal Immission
Control Ordinance (BImSchV), a CO,H2-compensated sensor
(0393 0101) is required.
The function is only available if the activated fuel is solid
fuel and adapter 0600 9765 has been connected.
Calling up the function:
>
[ ] → Measurement options → [OK] → Solid fuel → [OK] .
Performing the measurement:
1. Select parameters gas phase, meas. rate or stability time: [ ▲ ] ,
[ ▼ ] → [Change] .
2. Enter values. [ ▲ ] , [ ▼ ] and partly [ ◄ ] , [ ► ] → [OK] .
3. [Finished] .
4. Insert the flue gas probe into the exhaust pipe and position it in
the hot spot.