TESTO 330, Инструкция по эксплуатации

Страница: 68 / 84

6 Using the product
68
> End stability time and measurement early: [Next] .
- The readings and Result Let By Test are displayed when
measurement has been completed.
6. [Edit] → Select test result: [ ▲ ] , [ ▼ ] → [OK] .
6.2.17.4. Leak detection
In gas leak detection no measurement is made, but a gas detection
is performed.
✓
A gas leak probe (0632 3330) must be connected.
You must also refer to the documentation that comes with
the gas leak probe.
Calling up the function:
>
Leak Detection → [OK] .
Performing the detection:
> Set the gas type to be detected and perform gas leak testing by
following the instructions described in the documentation of the
gas leak probe.
1. Start detection: [ ] .
- The gas concentration is displayed, if it exceeds the limit an
alarm signal will sound.
Options:
> [Options] → Save : the readings are saved in a record.
>
[Options] → Show Graphic : The readings are displayed in
form of a line graph.
> [Options] → Alarm Limit : (This function is not available during
a measurement): Adjusting alarm limits.
> [Options] → Alarm Signal : (This function is not available
during a measurement): Alarm signal disable/enable.
> [Options] → Zeroing Probe : Perform zeroing.
> [Options] → Sensor detection : newly inserted sensor is
detected.
2. End detection: [ ] .