TESTO 330 Скачать руководство пользователя

Страница: 30 / 84

5 First steps

First steps

5.1.

Commissioning

The measuring instrument is supplied with a rechargeable battery
already fitted.
>

Charge the battery fully before using the measuring instrument,
see

Charging batteries, page

5.2.

Getting to know the product

5.2.1.

Mains unit / rechargeable battery

If the mains unit is connected, the measuring instrument is
automatically powered from the unit.

5.2.1.1.

Changing the battery

✓

The measuring instrument must not be connected to a mains
socket via the mains unit. The instrument must be switched off.

Change the rechargeable battery within 3 minutes so that device
settings (e.g. date / time) are not lost.

Place the measuring instrument on its front.

Remove the service cover: Take hold of it at the markings
(arrows) using the index finger and thumb, press slightly, fold
up and remove.

Open the battery lock: Press the grey key and push in direction
of arrow.

4. Remove the battery and insert a new rechargeable battery.

Only use the Testo rechargeable battery 0515 0107!

5. Close the battery lock: Press the grey key and push against

direction of arrow until the battery engages.

Attach the service cover and engage it in place.

Содержание 330





















































































Результаты поиска

Содержание 330

Отзывы:

Похожие инструкции для 330

Бренды по названию

Популярные бренды

TESTO 330, Инструкция по эксплуатации

Результаты поиска

Содержание 330

Отзывы:

Похожие инструкции для 330

Бренды по названию

Популярные бренды