TESTO 330, Инструкция по эксплуатации

Страница: 60 / 84

6 Using the product
60
Performing the measurement:
1. Start measurement: [ ] .
- The reading is displayed.
2. Quit measurement: [ ] .
Options:
> [Options] → Clipboard : Data are saved to the clipboard.
> [Options] → Delete clipboard : Any data saved to the clipboard
is deleted.
> [Options] → Save : The readings are saved in a record.
> [Options] → Show Graphic : The readings are displayed in
form of a line graph.
6.2.11. Gas flow
The function is only available if the chosen fuel is a gas.
Calling up the function:
> [ ] → Measurements → [OK] → Gas Flow → [OK] .
Performing the measurement:
1. Start measurement: [ ] .
- The measuring duration is displayed.
2. When the adjusted gas flow is reached: [ ] .
- The calculated gas flow and the gas burner capacity (in kW) are
displayed.
Options:
> [Options] → Clipboard : Data are saved to the clipboard.
> [Options] → Delete clipboard : Any data saved to the clipboard
is deleted.
> [Options] → Save : The readings are saved in a protocol.
> [Options] → Enter heating value : heating value can be set.
> [Options] → Units setting : the unit for gas flow, heating value,
duration and GasPgr can be changed.