13
ENG
This function will pump the fresh air
from outside to inside.
It’s normal if there is some noise during this
function process, as plastic materials expand with
heat and contract with cold.
We suggest operating this function at the following
ambient conditions to avoid certain safety
protection features.
Indoor unit
Temp < 86
°
F (30
°
C)
Outdoor unit
41
°
F (5
°
C) < Temp < 86
°
F (30
°
C)
It’s suggested to utilize this function every 3
months.
1. Long press
button over 3 seconds to active
this function, and
will appear on the
remote display. Do it again to deactivate this function.
2. This function will auto start the heating mode when
the room temperature is lower than 8
�
C (46
�
F), and it
will return to standby if the temperature reaches 9
�
C
(48
�
F).
3. If the room temperature is higher than 18
�
C (64
�
F),
the appliance will cancel this function automatically.
Continue press
button until select your desired
Fresh Air fan speed or deactivate this functionas
circulation
Low-Mid-High-OFF
, then loose button.
The following indicator will appear on the display:
Note:
1. This function is available when in OFF/Heating
Cooling/Fan/Auto mode.
2. In OFF mode, the system may run automatically
because of the big difference of temperature
between indoor and outside.
3. If the indoor display shows the Fresh Air indicator and
shows CL. You can replace the filter and long press
button
over 5 seconds to clear the indicator
CL.
1. Turn on the indoor unit, and change to COOL mode,
then long press
and
button
together 3 seconds to active this function, will
appear on the display.
Do it again to deactivate it.
2. This function will auto close the vertical flaps, and give
you the comfortable gentle wind feeling.
1. Turn on the indoor unit at first, press
to
active this function, will appear on the display.
Do it again to deactivate it.
2. When the HEALTH function is initiated, the Ionizer/
Plasma/ Bipolar Ionizer/ UVC Lights (depending on
models) will be energized and running.
8
�C
heating function (Optional)
Fresh Air function
Gentle Wind function
(Optional)
Health function (Optional)
button to cancel this function during the process.
You will hear 2 beeps when it’s finished or cancelled.
FRESH AIR
Auto fan speed
Low fan speed
High fan speed
OFF
(no indicator)
Mid fan speed
(Flash)
Содержание TT37AF-1232IAW
Страница 353: ......
Страница 354: ...www tesla info ...