Terex Evoquip Bison 120, Руководство по эксплуатации

Страница: 76 / 224

6 Initial Setup and Adjustments
Operations Manual
Bison 120
20-07-2018
Page 6-8
Revision 2.0
6.7 Setting Up the Machine
n
WARNING
Injection Hazard.
Fluid escaping under pressure can penetrate skin and result in death or serious injury.
Relieve pressure before disconnecting hydraulic lines.
Stay clear of leaks and pin holes. Use a piece of cardboard or wood to search for leaks. Do not
use hand.
Fluid injected into the skin must be surgically removed within a few hours by a doctor familiar with
this type of injury, or gangrene will result.
Always wear appropriate personnel protective equipment.
Nip Point Hazard.
Nip points exist where pins need removed or replaced. Stay clear of moving assemblies.
Moving Object Hazard.
When lifting any heavy sub assemblies there is always risk of the object unexpectedly moving.
Ensure an adequate distance is keep from the assembly when being raise from the ground.
Failure in doing so may result in serious injuries.
Always wear correct personnel protective equipment.
n
CAUTION
Ensure that all safety signs are present.
Fall hazard.
Falling material hazard.
Crush hazard.
Ensure that a full and thorough risk assessment has been carried out prior to carrying out any
setup procedures on the machine.
NOTICE
Before folding out the conveyor, ensure that there is adequate space for the conveyor to fold out
and for material stockpiles. The machine must be unfolded and setup in the correct sequence to
prevent damage.
Do not raise or lower any part of the machine with securing pins in position. Ensure that all pins
are removed before starting the machine and raising or lowing machine components.
Use the control levers in a smooth and controlled manner. Do not rush or jerk the controls.
It is mandatory to have a Banksman present for any activities where an operators view is obstructed.