Terex Evoquip Bison 120, Руководство по эксплуатации, Страница: 60 / 224

5 Transportation
Operations Manual
Bison 120
20-07-2018
Page 5-8
Revision 2.0
5.3 Loading the Machine for Transport
n
WARNING
Crush Hazard
Always wear appropriate personnel protective equipment.
NOTICE
Before transportation of the machine, check for loose or damaged components. Fasten all loose
parts, replace missing items or make repairs as found necessary to ensure that all components
are secured during transportation.
Securing the machine and any loose items to the low loader/ trailer is the responsibility of the
haulage contractor.
PROCEDURE
1. Before loading, the plant must be prepared for transportation, refer to putting the machine
into the transport position.
2. Check that the travelling dimensions and weight, when loaded, will be within the regulation
limits, refer to plant specification and information.
3. Make sure suitable ramps are positioned at the end of the trailer to load the machine.
4. Ensure all loose items are carefully stowed and secured if these are to be transported on
the plant.
5. Check that any loose items transported with the machine will not cause a hazard while loading.
6. Ensuring that the engine/motors are running at idle, load the machine slowly onto the trailer,
manoeuvring the machine with the tracks, using the umbilical control or the remote radio
control, if fitted.
7. Stop the machine.
(1) Prior to Haulage
PROCEDURE
1. Check for loose parts or debris on the machine.
2. Ensure all pins are secured with ‘R’ pins and Split pins.
3. Ensure persons transporting the machine adhere to all safety signs and procedures.