Terex Evoquip Bison 120, Руководство по эксплуатации, Страница: 113 / 224

Maintenance 9
Operations Manual
Bison 120
20-07-2018
Page 9-5
Revision 2.0
When power or steam cleaning the machine be aware of the risk of damaging components i.e.,
electrical components , bearings. Water ingress or heat may penetrate or damage seals leading
to premature failure.
Remove any buildup of stones, dust, grease, oil, or other debris from the machine.
(1) Diesel Engine
The diesel engine is the heart of your machine and a great deal of care and thought has gone
into its selection. In the interest of continued peak performance from your machine the engine
must be maintained and cared for with meticulous attention in accordance with the manufacturers
instructions as detailed in the “Operators Handbook”, a copy of which is included with this manual.
(2) Crusher
The best way to keep the crusher in good operating condition is to adopt a planned program of
inspection and preventative maintenance. It is recommended that a record be kept of the actual
operating hours of the crusher, the inspection intervals, and the maintenance required. A new
crusher should be examined after a relatively short period of operation.
(3) Vibrating Drawer
The greatest single factor extending the life of the vibrating drawer is proper lubrication. Insufficient
lubrication quickly damages the bearings. Cleanliness is vitally important. Dust and dirt will cause
premature failure of the bearings. Clean all dirt from openings before removing caps. Use only
the recomended grease to fill the motors.
(4) Extraction Belt
The Extraction Belt has a plain troughed belt with a vulcanized joint, with hydraulic motor drive
at a pre-set speed. The extraction belt can be fitted with an optional magnetic belt to discharge
of unwanted iron.