Tennant GL20 Скачать руководство пользователя страница 34

Страница: 34 / 68

OPERATION

S20 Gas/LP 9006719 (4

−

2014)

OPTIONS

VACUUM WAND

The vacuum wand uses the machine’s vacuum
system. The vacuum hose and wand allow
pick-up of debris that is out of reach of the
machine.

1. Stop the machine within reach of the area to

be vacuumed.

2. Set the machine parking brake and turn the

machine off.

FOR SAFETY: Before leaving or servicing
machine, stop on level surface, set parking
brake, and turn off machine.

NOTE: If the operator is not in the seat, the
parking brake must be engaged or the machine
will automatically shut off after 2 seconds.

3. Open the hopper cover and prop the cover

open.

4. Remove the vacuum wand from the mounting

clips and the hose from the storage
compartment.

5. Connect the vacuum hose to the vacuum

wand.

6. Open the access door located at the front of

the machine.

7. Connect the other end of the vacuum hose to

the hopper hose connector.

8. Start the engine.

FOR SAFETY: When starting machine, keep
foot on brake and directional pedal in neutral.

9. Move the throttle lever all the way forward into

the

Fast engine speed

position.

Содержание GL20





































































Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды

Tennant GL20, Руководство оператора

Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды