Tennant GL20 Скачать руководство пользователя

Страница: 35 / 68

OPERATION

S20 Gas/LP 9006719 (8

−

2009)

10. Pull and hold the hopper door lever back until

the hopper door closed light comes on.

11. Move the vacuum and filter shaker lever into

the

Vacuum fan on

position

12. Vacuum the area as needed.

WARNING: Accident may occur. Do not
operate vacuum wand while driving.

13. When finished, push the hopper door lever

forward into the

Hopper door open

position

to open the hopper door.

14. Shut the machine off.

15. Remove the vacuum hose from the hopper

connection.

16. Close the access door.

17. Disconnect the vacuum hose from the

vacuum wand.

18. Put the vacuum wand in the mounting clips

and the hose into the storage compartment.

19. Close the hopper cover.

TOWER BUMPERS (OPTION)

The tower bumpers help protect the machine from
being damaged. Open the tower bumpers before
opening the seat support.

To open the bumpers:

1. Pull the pin from the bracket and the bumper.

2. Open the bumper.

3. Close and secure the tower bumpers before

operating the machine.

Содержание GL20





































































Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды

Tennant GL20, Руководство оператора

Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды