Tennant GL20 Скачать руководство пользователя страница 16

Страница: 16 / 68

OPERATION

S20 Gas/LP 9006719 (8

−

2009)

CHARGING SYSTEM LIGHT

The charging system light comes on when the
alternator is not operating within normal range;
13.5 to 14.5 V. If the light comes on, stop
operating the machine. Contact a TENNANT
service representative.

ENGINE WATER TEMPERATURE LIGHT

The engine water temperature light comes on
when the temperature of the engine coolant is
more than 113

C (235

F). If the light comes on,

stop operating the machine. Contact a TENNANT
service representative.

CLOGGED DUST FILTER LIGHT

The clogged dust filter light comes on when the
hopper dust filter is clogged.

To clean the filter, hold the vacuum and filter
shaker lever in the

Filter shaker

position. If the

clogged dust filter light remains lit, manually clean
the hopper dust filter. See

HOPPER DUST

FILTER

in the

MAINTENANCE section of this

manual.

NOTE: The clogged dust filter light also comes
on when the hopper door is closed and the
vacuum fan is on.

HOPPER TEMPERATURE LIGHT

−

THERMO

−

SENTRY

The hopper temperature light comes on when the
Thermo

−

Sentry senses that there is excessive

heat in the hopper, possibly from a fire. The
Thermo

−

Sentry will also move the vacuum and

filter shaker lever to the

Vacuum fan off

position.

If this happens, stop the machine, eliminate the
source of the heat, and return the lever to the

Vacuum fan on

position.

Содержание GL20





































































Результаты поиска

Содержание GL20

Отзывы:

Tennant GL20, Руководство оператора, Страница: 16 / 68

Результаты поиска

Содержание GL20

Отзывы: