Tennant GL20 Скачать руководство пользователя страница 23

Страница: 23 / 68

OPERATION

S20 Gas/LP 9006719 (4

−

2014)

CHANGING THE LPG TANK

1. Park the machine in a designated safe area.

FOR SAFETY: Before leaving or servicing
machine, stop on level surface, set parking
brake, turn off machine, and remove key.

2. Close the tank service valve on the LPG tank

located under the operator seat.

350412

3. Operate the engine until it stops from lack of

fuel.

WARNING: Machine emits toxic gases.
Serious injury or death can result.
Provide adequate ventilation.

FOR SAFETY: When servicing machine, keep
flames and sparks away from fuel system
service area. Keep area well ventilated.

4. Put on gloves and remove the quick

disconnect tank coupling.

350412

5. Unlatch and remove the empty LPG fuel tank

from the machine.

6. Carefully put the filled LPG tank in the

machine so that the tank centering pin enters
the aligning hole in the tank collar.

350412

7. Fasten the tank hold-down clamp to lock the

tank in position.

8. Connect the LPG fuel line to the tank service

coupling. Make sure the service coupling is
clean and free of damage. Also make sure it
matches the machine service coupling.

350412

9. Open the tank service valve slowly and check

for leaks. Close the service valve immediately
if an LPG leak is found, and tell the
appropriate personnel.

350412

Содержание GL20





































































Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды

Tennant GL20, Руководство оператора

Результаты поиска

Содержание GL20

Отзывы:

Похожие инструкции для GL20

Бренды по названию

Популярные бренды