OPERATION
27
S20 Gas/LP 9006719 (8
−
2009)
EMPTYING THE HOPPER
1. Stop sweeping and shake the filter.
2. Pull and hold the hopper door lever back until
the hopper door closed light comes on.
3. Slowly drive the machine to the debris site or
debris container.
4. Pull and hold the hopper raise / lower lever
back and raise the hopper to the desired
height. Release the lever into the
Hold
position.
FOR SAFETY: When using machine, do not
raise hopper when machine is on an incline.
Make sure adequate clearance is available
before raising hopper.
NOTE: Be aware that the minimum ceiling height
needed to high dump the hopper is 2490 mm
(98 in).
5. Drive the machine up to the debris container.
Position the hopper over the debris container.
FOR SAFETY: When using machine, move
machine with care if hopper is raised.
6. Move the vacuum and filter shaker lever into
the
Vacuum fan off
position.
7. Push the hopper door lever forward to empty
the hopper.
