EN
OPERATION
2100/2120/2140/2150/2200/2260 (07–03)
2
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list. Read this
manual completely and understand the machine
before operating or servicing.
Use the illustrated Parts List to order replacement
parts. Before ordering parts or supplies, be sure to
have your machine model number and serial number
available. Parts and supplies may be ordered by
phone or mail from any authorized parts and service
center, distributor or from any of the manufacturer’s
subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
The machine is operated with reasonable care.
The machine is maintained regularly - per the
maintenance instructions provided.
The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
Please fill out at time of installation for future reference.
Model No.-
Install. Date -
Serial No.-
2002, 2003 Tennant Company Printed in the Czech Republic
TABLE OF CONTENTS
SAFETY PRECAUTIONS
3
. . . . . . . . . . . . . . . . . . . .
GROUNDING INSTRUCTIONS
4
. . . . . . . . . . .
SAFETY LABELS
4
. . . . . . . . . . . . . . . . . . . . . . . . . . .
MACHINE COMPONENTS
5
. . . . . . . . . . . . . . . . . . .
MACHINE ASSEMBLY
5
. . . . . . . . . . . . . . . . . . . . . .
ATTACHING HANDLE TO BASE
5
. . . . . . . . . .
ATTACHING OPTIONAL SOLUTION TANK
5
.
MACHINE SETUP
6
. . . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLING PAD DRIVER/PAD/BRUSH
6
. . .
MACHINE OPERATION
7
. . . . . . . . . . . . . . . . . . . . .
OPERATING MACHINE
7
. . . . . . . . . . . . . . . . . .
OPERATING THE OPTIONAL
SOLUTION TANK
8
. . . . . . . . . . . . . . . . . . . . . . .
MACHINE MAINTENANCE
8
. . . . . . . . . . . . . . . . . .
STORING MACHINE
9
. . . . . . . . . . . . . . . . . . . . . . . .
RECOMMENDED STOCK ITEMS
9
. . . . . . . . . . . . .
TROUBLE SHOOTING
10
. . . . . . . . . . . . . . . . . . . . . .
SPECIFICATIONS
11
. . . . . . . . . . . . . . . . . . . . . . . . . .
MACHINE DIMENSIONS
12
. . . . . . . . . . . . . . . . . . . .
PARTS LIST
130
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2100, 2120, 2150, & 2260 HANDLE GROUP
130
2140 & 2200 HANDLE GROUP
132
. . . . . . . . . . . .
2100 BASE GROUP
134
. . . . . . . . . . . . . . . . . . . . .
2120 BASE GROUP
136
. . . . . . . . . . . . . . . . . . . . .
2140 BASE GROUP
138
. . . . . . . . . . . . . . . . . . . . .
2150 BASE GROUP
140
. . . . . . . . . . . . . . . . . . . . .
2200 BASE GROUP
142
. . . . . . . . . . . . . . . . . . . . .
2200 MOTOR BREAKDOWN
144
. . . . . . . . . . . . .
2260 BASE GROUP
146
. . . . . . . . . . . . . . . . . . . . .
2260 MOTOR BREAKDOWN
148
. . . . . . . . . . . . .
ELECTRICAL DIAGRAMS
150
. . . . . . . . . . . . . . . . . . .
OPTIONAL EQUIPMENT
154
. . . . . . . . . . . . . . . . . . . .
SOLUTION TANK GROUP
154
. . . . . . . . . . . . . . . .
REPLACEMENT BRUSHES AND
PAD DRIVER GROUP
156
. . . . . . . . . . . . . . . . . . .
Leo Suurmond – Technical Support Engineer
EC DECLARATION OF CONFORMITY FOR MACHINERY
(Directive 89//392/EEC, Annex II, sub A)
TENNANT N.V.
Address:
Industrielaan 6 5405 AB
P.O. Box 6 5400 AA Uden–The Netherlands
nr.: 801413, 801434, 801410, 801321, 801214, 801376, 801322, 801215, 801419, 801441, 801378,
801395, 801216, 801423, 801443, 801393, 801389, 801437, 801425, 801415, 613251
EN
Uden/Netherlands, 02–28–03
Herewith declares, on our own responsibility, that the machinery
– is in conformity with the provisions of the Machinery Directive (89/392/EEC), as amended with
91/368 EEC, 93/44 EEC, 93/68 EEC and with national implementing legislation
– is in conformity with the provisions of the provisions of the E.M.C. Directive (89/336/EEC), as amended
with 91/263 EEC, 92/31 EEC, 93/67EEC , 93/68 EEC and with national implementing legislation
– is in conformity with the provisions of the provisions of the Low Voltage Directive (73/23/EEC), as
amended with 93/68 EEC and with national implementing legislation
and that
– the following (parts/clauses of) harmonized standards have been applied: EN: 292–1, 292–2, 292–3,
1050, 418, 982, 1037, 60204–1,61310–1, 61310–2, 457, 614–1, 1005–3, 563, 50081–2, 50082–2, 12895,
ISO: 3744, 3746,
– the following (parts/clauses of) national technical standards and specifications have been used: NA
Model: 2100, 2120, 2140,
2150, 2200, 2260
