2.2 Battery status indication
If the batteries need to be charged, the sensor unit will lit
red
light.
Tendo MyUnit also displays the sensor unit's current battery charge in the upper left corner of the
app's main window.
2.3 How to charge the batteries
1.
Connect the power adapter to 110 - 230V AC power outlet
2.
Plug the connector into the Power Supply Connector on the front panel of the Wireless
Sensor Unit
Battery status indication while charging the sensor unit:
-
red light
indicates low voltage —> batteries need to be charged
-
red light
—> also accompanies the charging process
-
once the red light is turned off
the batteries are sufficiently charged —> end the charging
process
2.4 How to change the batteries
1.
Open the battery compartment
2.
Remove old batteries
3.
Referring to the insert drawing, place the batteries into the compartment. Press 4 batteries
into the battery compartment. MAKE SURE that the positive ends of the batteries (marked “+“
are touching the springs (marked “+“) in the battery compartment.
***
Use only NiMH, AA size rechargeable batteries, 2000 - 2500 mAh!
***
If the batteries are correctly positioned in the battery compartment, when turned on, the sensor unit
illuminates with a
pulsing blue light.
If the sensor unit is turned on and is lit with
red light
(low battery charge), the batteries need
charging.
!!
If the sensor unit does not lit up, please check the polarity of inserted batteries
!!
!!
Tendo MyUnit can also be used when the batteries are charging
!!
7