6.2 Finish
The “
Finish
” command saves the measured data (if any) and switches the application to an
OFFLINE mode (e.i.
MyUnit app is disconnected from the Wireless Sensor Unit
). All data will be
cleared from the screen. While in the OFFLINE mode, it will be possible to open saved files.
The values in Settings remain unchanged - as they were saved previously.
Note:
If you want to disconnect the application from the Wireless Sensor Unit and, for example, connect
the application to another Wireless Sensor Unit, you can do so by clicking “
Disconnect”.
Then tap “
OFFLINE, tap to connect
” to open a list of all available Wireless Sensor Units. Tap on
your chosen sensor unit (
the serial number of your Wireless Sensor Unit has to match the number
in the app) to pair the application with the selected sensor
).
7 Opening saved activities / exercises
7.1 Via “Open Exercise” Search
By tapping the “
Open Exercise
”, a “
Search Exercise
” window opens. Here you can filter out your
activities based on a exercise type, parameter, date and load.
29