In the middle of the panel, the app displays the selected parameter and its percentage compared
to the best rep in the set.
The application displays the following parameters:
-
Peak Power
-
Average Power
-
Partial Average Power
-
Peak Velocity
-
Average Velocity
-
Peak Force
You can change the displayed parameter by moving it up or down on the numeric panel.
Load:
The left part of the main numerical panel shows the current weight for the displayed repetition.
Weight settings can also be changed during a workout series without deleting the data already
loaded. If the weight setting changes during the workout series, subsequent reps will be displayed
with the new weight.
*
The set weight and the displayed weight in the main numerical panel may not be the same. The
weight displayed in the main numerical panel is compatible with the repetition displayed.
*
Rest Time:
If the Tendo MyUnit App is connected to a Wireless Sensor Unit and a repetition was performed,
the time of subsequent sensor unit inactivity will be measured, representing the Rest Time between
reps or sets.
Rest Time is not saved, only displayed when the app is connected to a Wireless Sensor Unit.
The Rest Time is automatically reset whenever the sensor cable is active.
Set number:
When the rest time between reps is exceeded, the app evaluates the repetition set as the end of
the training set and displays the Total Work Time in the training set. If the exercise is not changed,
the app will consider the sensor cord's subsequent movement as a new set of the same exercise.
The set number is displayed in the lower-left corner of the main numerical panel.
You can scroll through the repetitions by swiping to the right or left on the main numerical panel or
the bar graph.
19