Snappi System User Manual
Document No: 053-05 v29
Page 31 of 75
December 2015
Snappi System User Manual.doc
5.5 Fitting the Groin Adaptation Strap (Optional)
Fig 5.5.1
The Groin Adaptation strap is a piece of
webbing which can fit to the pelvic strap or the
H belt harness to help with the positioning of
the child. It is designed to help prevent the
child from slipping forward underneath the
harness.
Feed the loop end of the strap up through
either of the two slots in the base of the
seat. (See Fig 5.5.3) The slot that should
be used will be determined by the size of
the child. For larger children the slot closest
to the front of the seat will probably be more
suitable, whilst for smaller children the
second slot in would most likely be
appropriate. Please note you may need to
move the 3 bar slider down the strap.
Fig 5.5.2
Fig 5.5.3
The pelvic strap, or lap belt of the H-belt
harness should then be threaded through the
loop end of the groin adaptation strap. (See
Fig 5.5.2) Once the strap is in place, and you
have comfortably positioned your child, slide
the 3 bar slider up so that it is as close under
the seat as possible. This will keep the strap
in place.
