Snappi System User Manual
Document No: 053-05 v29
Page 55 of 75
December 2015
Snappi System User Manual.doc
Once the pad is cut to the required size, lift up the seat cover and slide the seat pad in
from the front of the seat (see Fig 6.10.1). Do not remove the hip guide or seat covers as
attempting to fit the covers with the seat pad in place may result in damage to the covers.
6.11: Foot Muff:
Fig 6.11.1
The foot muff is made to fit the seat in its
extended size. This is to ensure that the foot
muff will grow with the seating system.
To fit the foot muff to the pushchair, hook
the top pocket over the back of the seat.
Place the lower end on top of the footrest as
shown (see fig 6.11.2, right).
This ensures the foot muff is held safely
away from the wheels and helps prevent it
getting dirty.
Fig 6.11.2
Fig 6.11.3
Push the foot muff into the seat. Note that if
the seat set to a minimum or mid position
for seat depth or back height then there will
be excess material. This can be tucked
away in the gap between the seat base and
backrest as shown (see Fig 6.11.3, left).
