Snappi System User Manual
Document No: 053-05 v29
Page 73 of 75
December 2015
Snappi System User Manual.doc
6.
Snappi Pushchairs purchased after
November 2012 come with a front
tie down bracket, that fits between
the front castor and frame. Attach
the restraint system to this mounting
point using a standard Karabiner
hook (See Fig 12.2.1B). Note:
Always use the tie down bracket
if present.
Fig 13.2.1B
7.
Attach the rear restraints to the floor
track and to the two rear tie down
brackets on the frame. These are
positioned halfway up the rear
frame, just above the brake
mechanism. (See Fig 12.2.2)
Fig 13.2.2
8.
To release the wheelbase follow the above instructions in reverse order.
IN EMERGENCY PRESS THE RELEASE BUCKLES
Warning:
The above only secures the wheelbase not the passenger. It is essential that a separate
vehicle harness be fitted providing lap and over the shoulder protection to the passenger
(See Fig 13.2.3). We recommend the Unwin Safety Systems Double Inertia Reel Harness be
used.
Tie down
bracket
Attach
Karabiner
Hook here
