Snappi System User Manual
Document No: 053-05 v29
Page 20 of 75
December 2015
Snappi System User Manual.doc
4.5 Folding as a complete system (size 1 only) –
Not suitable for rearward facing model
First, set the seat to full tilt in space as
detailed in section 4.4
Next fold the chassis as described in
section 4.1 without removing the seat.
Fig 4.5.1
Fig 4.5.2
Next, set the seat back angle to its
maximum position as shown (see instruction
on section 5.1.3).
Finally, fold the footrest, and tuck it in using
the knee angle adjustors as shown (see
section 5.1.2 for details).
Fig 4.5.3
4.6 Folding as a 2 part system (all models) – Including rearward facing model
Fig 4.6.1
To fold the system as a 2 part, first set the
seat back angle to 90
o
(see section 5.1.3),
remove the seat and fold the frame as
detailed in section 4.1.
Next place the seat, face down over the
folded chassis as shown.
Finally, fold the footrest tray and angle the
footrest tubes to sit closer to the seat (see
section 5.1.2 for how to adjust and fold the
footrest).
