Snappi System User Manual
Document No: 053-05 v29
Page 67 of 75
December 2015
Snappi System User Manual.doc
10: Maintenance
Should a problem be found when carrying out the regular checks, it should be immediately
reported to the issuing authority or Tendercare Ltd.
10.1 Routine maintenance
The user’s family can easily carry out the following tasks. The supplied 5mm Allen key is
required to tighten the footrest.
1. Always wipe the wheelbase and seat frame dry. Never put them away damp.
2. Check that the two M8 x 16 footrest bolts are in place and are tight by using the
Allen key (daily).
3. Check all nuts, bolts, and hand wheels are tight (daily)
4. Check operation of the brake, folding and reclining mechanisms (weekly).
5. Check condition of harnessing and stitching (weekly).
6. Clean frame when necessary (we suggest at least once a week).
7. If your pushchair is fitted with pneumatic tyres, regularly check the condition of the
tyre. Ensure tyres are inflated to 36 psi (if too low use a suitable hand or foot pump,
do not use an air-line or mechanical inflator, and do not over inflate the tyre). In the
event of a puncture, you will need to purchase a set of tyre levers and a puncture
repair kit form a reputable bicycle shop. Always follow the instructions given in the
puncture repair kit.
If you find any faults refer to your issuing authority or Tendercare Ltd.
10.2 Six-monthly maintenance
Only someone who is a competent tradesman or repairer should carry out this work. If a
major fault is found stop using the wheelbase until it has been corrected.
1.
Fold and open the wheelbase. Check that all movements through the folding
range are free. Examine frame for any damage.
2.
Check operation of the wheelbase tilt in space mechanism, and the seat back
recline.
3.
Examine upholstery and foot straps for wear and arrange for replacement if
necessary.
4.
Examine nuts, bolts, pivots and frame plugs for tightness and general condition.
5.
Examine brake assembly for wear, damage and correct operation.
6.
Examine tyres for sharp objects, cuts or splits.
7.
Examine castor and wheel bearings for excessive wear.
