Templari KITA ACQUA Скачать руководство пользователя страница 40

Страница: 40 / 56

www.templari.com

4 - Condition of the unit

The conditions in which the unit can be are:

• OFF

• ON

• ENERGY S.

• AUTO-OFF

• AUTO-ON

• AUTO-E.S.

• Din-OFF

• BMS-OFF

• ALARM-OFF

• PROTECT

• BOILER AUTOMATIC MANAGEMENT IF REQUIRED

OFF

The machine is in standby: the antifreeze function stay

active (attivation internal circulator and, if required from

too cold external temperature, compressor activation)

contrary it isn’t active the regulation according to the

request of the system

All the functions are active e la macchina regola seguendo

la richiesta dell’impianto.

ENERGY S.

Tutte le funzioni sono attive and the machine set according

to a setpoint “reduced” (settable from the screen B02, see

here below). This condition permits an energy saving.

AUTO-OFF

The machine sets according to the set time tables (screen

C02) and following the nominal setpoint (settable from the

screen B01). The machine is in OFF.

AUTO-ON

The machine sets according to the set time tables (screen

C02) and following the nominal setpoint (settable from the

screen B01). The machine is in ON.

AUTO-E.S.

The machine sets according to the set time tables (screen

C02) and following the setpoint of Energy Saving (settable

from the screen B02).

Din-OFF

The machine is turned off by an input digital contact (if

provided).

BMS-OFF

The machine is turned off by a supervisor BMS (if provided).

ALARM-OFF

The machine is in OFF because of an alarm.

PROTECT

Antifreeze function for cold external temperatures and too

low temperature of the system: the compressor is active

until reaching a system temperature of 40°C.

BOILER AUTOMATIC MANAGEMENT IF REQUIRED

The start up of the boiler is automatically managed by the

control of the heat pump.

12.4 Terminal buttons

-Alarm Visualize the list of the active alarms.

It allows to enter in the main menu tree.
Come back to the previous screen.

-Up

It scrolls a list up or allows to increase the value visualized on the

screen.

-Down It scrolls a list down or allows to decrease the value visualized on

the screen.

-Enter Enter in the selected submenu or confirm the set value.

12.5 Display of the terminal

22:06 30/05/16 Unit:01

T.Sanit.:

T.Esterna:

T.Impian.:

STATO:

Off

24.0°C

20.5°C

19.9°C

1 - indications about date, time and unit connected.

2 - main sizes and active request

No active requests

domestci hot water active request

Hot water request from primary circuit

Cold water request from primary circuit

Total recover: request DHW + cold water from primary circuit

3 - Main active actuators

It is activated at the same time compressor/s start up.

It is activated if there is a request of heating of the domestic water
It is activated when one of the pumps of the system is on, except for

pumps solar collectors

It is activated if the sola collectors are installed and active
It is activated if the integration system of the unit (resistance or boiler)

is working.

If in the same time the icon “solar collectorsi” is active, just the last is

displayed.
It is activated when a defrosting is in progress, alternatively to the 2

icons shown above

Содержание KITA ACQUA

























































Результаты поиска

Содержание KITA ACQUA

Отзывы:

Бренды по названию

Популярные бренды

Templari KITA ACQUA, Руководство по установке и обслуживанию

Результаты поиска

Содержание KITA ACQUA

Отзывы:

Бренды по названию

Популярные бренды