Tempest Tacit 8 56.050L, Руководство пользователя

Страница: 57 / 75

Tacit 8 User Manual 57
Projector Mounting – Tacit 050-150 Landscape
The projector slide tray may be supplied to slide out of
either right or left side (left slide shown here).
Now that most projectors have the same vertical lens
shift in both directions, tabletop (feet down) installation
is standard.
1. Remove the projector clamps and threaded
rods on the side nearest you
2. Place the projector in position
3. Adjust projector alignment
4. Replace the threaded rods and projector
clamps and tighten firmly in place.
For Ceiling-style (feet-up) installation, see the 52.FU Kit
below.
Projector Mounting – Tacit 050-150 Landscape Feet-up Kit
The feet-up kit (52.FU) may be used in fixed or slide
mounting enclosures.
The kit comprises two platforms, adjustable in height to 25,
50 or 75mm (1, 2 or 3in). This allows for mounting different
sized projectors as high as possible in the enclosure, for
maximum downwards lens shift, without clipping on the edge
of the port glass.
Set the platforms on the projector bridges/tray, and lay the
projector, feet up, on the padded bearing surfaces.
Align the projector and clamp in place with the projector
clamps.
The Feet-up kit comes with two sets of legs, for 50mm and
75mm heights.
For 25mm height, discard the legs.
Feet-up Platform
Projector Clamp
75mm (3in)
50mm (2in) 25mm (1in)
Projector Clamp
Threaded Rod