Tempest Tacit 8 56.050L, Руководство пользователя

Страница: 18 / 75

Tacit 8 User Manual 18
Wiring Access
You have a choice of conduit entry points: either on
the top or the back panel.
Conduit openings accept PG21 (International, 29mm
hole) and ¾” NPT (North America) conduit fittings.
Use permanent or flexible conduit to connect power
and signal cables to your enclosure.
ALWAYS RUN POWER AND SIGNAL CABLES IN
SEPARATE CONDUITS.
Using the Conduit Knockouts
Use a screwdriver to bend the inner conduit blank
covers back inside the enclosure. It is not necessary to
break off the cover tabs
– just bend them right back.
Accessing the wiring Compartment
Remove the wiring compartment screws and rubber
washers.
DEC Control Cover
Conduit Entries:
Back Panel
Conduit Entries:
Top Panel
Inside view