Tempest Tacit 8 56.050L, Руководство пользователя

Страница: 12 / 75

Tacit 8 User Manual 12
Installation
Mounting Hardware Options
Mounting Bolts
•
HANGING: Each Enclosure MUST be mounted
with all six rigging points.
•
STANDING: Each Enclosure must be mounted
with all four rigging points.
•
All mountings must be made using the M12
threaded holes on the of the enclosure.
•
Use an 8mm hex key to secure the M12 socket
cap screws provided.
•
Tempest recommends the use of stainless steel
mounting hardware.

IMPORTANT SAFETY NOTICE
Installer must ensure that all mounting points are
secure and conform to local safety regulations.
Tempest Lighting Inc. accepts no responsibility for
damage or injury arising from inappropriate or unsafe
installation.
Unistrut Kit
If mounting positions for the corner bolts are not
convenient, use the Unistrut Kit (55.UR.xxx) to add
two Unistrut rails to the top or bottom of the
enclosure.
Using standard Unistrut channel nuts, the enclosure
may now be attached at any point along the Unistrut
rails.
8mm
M12-1.75 bolts
Use 8mm hex key
HANGING: Use all
six rigging points
STANDING: Use
all four rigging
points