Blizzard Enclosure User Manual
page 44
operating temperature of 0°C, and users may set it lower than the
default if desired.
Humidity
Range 50-90%,
Default 80%
The threshold at which incoming air is more aggressively heated to remove
moisture. This parameter will not normally require adjustment.
DMX Set
Range 001-510, Default 001
Sets the DMX address for the lamp relay control. In the DMX/RDM service mode,
the subsequent two DMX slots control fan and heater respectively.
Lamp Hours
Default 0000
DEC3 counts the hours your projector/fixture lamp is on, and can report it both
on the user interface display and over RDM.
Remember to reset to 0 when
changing lamps
. This is provided to allow lamp hours monitoring on devices
such as Video Projectors and certain moving lights that have no native RDM or
DMX support.
