Blizzard Enclosure User Manual
page 10
2.4 Mounting Base-down and Base-up
All Blizzard enclosures are designed to be mounted base-down, on a solid structure, using Unistrut
mounting hardware. They may also be suspended from an overhang, ceiling or truss, using the same
hardware. Note that in this event it will be necessary to flip the projector image, since the projector
itself will be hanging upside-down. It’s important to be sure that the projector to be used supports this
feature (usually referred to as Ceiling Mount mode) before commencing installation.
Air vents for Base-up operation
When the Blizzard is used base-up, remove the front
and back air vents, invert, and replace, to prevent
rainwater ingress.
IMPORTANT SAFETY NOTICE:
It is the responsibility of the installer to ensure that all mounting points are secure and
conform to local safety regulations. Tempest Lighting Inc. accepts no responsibility for
damage or injury arising from inappropriate or unsafe installation.
Rear air exhaust vent,
inverted for base-up
operation. Do the same
with the front intake
vent.
