Blizzard Enclosure User Manual
page 28
running lower, then you may reduce the cutoff temperature margin. In hot climates, it
may be advisable to set both TOP TEMP and CUTOFF TEMP as high as possible.
SET TEMP C OR F
Choose to display temperature values in Celsius or Fahrenheit (default Celsius)
RDM Monitoring and Configuration
All the features accessible over the DEC3.2 control panel are also available over RDM. Just how
this information is displayed will depend on the RDM interface used. The following screen shots
were taken running the GetSet program in Windows 7, and connecting to a DEC3.2 controller
using a RDM TRI MK1 interface, both from JESE Ltd (jese.co.uk).
This view shows a single
DEC3.2 test unit that has been
correctly discovered and
labeled by the GetSet software
suite, and a log of RDM
messages.
This RDM interface provides a
graphic view of the various
sensor functions supported by
DEC3.2 (humidity, air
temperature, pcb
temperature).
There is a great deal of
variability in the way RDM
interfaces handle generic and
manufacturer-specific
information. We recommend
