Teltonika FM1100 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 82

Teltonika FM1100 Скачать руководство пользователя страница 7

7

The device is designed to be mounted in a zone of limited access, which is inaccessible for

the operator. All related devices must meet the requirements of standard EN 60950-1.

The device FM1100 is not designed as a navigational device for boats.

1.3

Legal Notice

Copyright © 2012 Teltonika. All rights reserved. Reproduction, transfer, distribution or

storage of part or all of the contents in this document in any form without the prior written
permission of Teltonika is prohibited.

Other products and company names mentioned here may be trademarks or trade names

of their respective owners.

The manufacturer reserves the right to make changes and/or improvements at any time in

design, functionality, parameters and electrical characteristics without any prior notice and
without incurring obligations.

1.4

About document

This document contains information about the architecture, possibilities, mechanical

characteristics, and configuration of the FM1100 device.

Acronyms and terms used in document
PC – Personal Computer.
GPRS – General Packet Radio Service
GPS – Global Positioning System
GSM – Global System for Mobile Communications
SMS – Short Message Service
AC/DC – Alternating Current/Direct Current
I/O – Input/Output
Record – AVL data stored in FM1100 memory. AVL data contains GPS and I/O information
AVL packet - data packet that is being sent to server during data transmission. AVL packet

contains from 1 to 50 records.

2

BASIC DESCRIPTION

FM1100 is a terminal with GPS and GSM connectivity, which is able to determine the

object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for
applications, which need location acquirement of remote objects. It is important to mention that
FM1100 has additional inputs and outputs, which let you control and monitor other devices on
remote objects. FM1100 also has a USB port for device status log output and entering
configurations.

2.1

Package contents

1

The FM1100 device is supplied to the customer in a cardboard box containing all the

equipment that is necessary for operation. The package contains:

FM1100 device;
Input and output power supply cable with a 2x5 connection pins;
GPS antenna;
GSM antenna;

1

Package content depends on Order Code, and can be customized by customer needs.

«
...
5
6
7
8
9
...
»

Содержание FM1100



















































































Отзывы:

Нет отзывов