Teltonika FM1100 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 82

Teltonika FM1100 Скачать руководство пользователя страница 21

21

4.2

Updating firmware via GPRS

Firmware can also be updated over GPRS using RILS system.
RILS stands for Remote Imlet Loading System, which is used to update FM1100 processor

firmware. In order to update firmware, server sends a SMS to the FM1100 and directs it to
connect to the server and download new firmware. The special web interface is used for this
operation. Address of the web application is:

http://212.47.99.62:5002/RILS-web/

.

For RILS login and password please contact your sales manager.

Figure 17 Remote Imlet Loading

After logging in click on ‘Upload FM4’, click Browse,

select FM1100 firmware file from hard

disk, click OK and then Upload. Select uploaded firmware from the list (last one) and click next.
Enter necessary parameters in the fields:



Server IP:

212.47.99.62 – always the same

! Always use this IP.



Server port:

5009 – always the same

! Always use this port



Module number is GSM number of SIM card in worldwide standard, for example:
+37069912345.

Enter your APN, APN (chap) login and password. After entering all parameters, click ‘Add

Module’. To operate multiple devices, enter new IMEI and GSM number and click ‘Add Module’
again. Otherwise click ‘Next’ and if all data is correct, in next window click ‘Upload’.

5

OPERATIONAL BASICS

5.1

Operational principals

FM1100 module is designed to acquire records and send them to the server. Records

contain  GPS  data  and  I/O  information.  Module  uses  GPS  receiver  to  acquire  GPS  data  and  is
powered with three data acquire methods: time-based, distance-based and angle-based method.
Note, that if FM1100 loses connection to GPS satellites, it continues to make records, however
coordinate  in  these  records  remains  the  same  (last  known  coordinate).  Method’s  details  are
described  in  section  5.14.  All  data  is  stored  in flash  memory  and  later  can  be  sent  via  GPRS  or

«
...
19
20
21
22
23
...
»

Содержание FM1100



















































































Отзывы:

Нет отзывов