Teltonika FM1100, Руководство пользователя, Страница: 32 / 82

32
5.9 System settings
System settings have 4 configurable parameters:

Deep sleep settings, where user can turn deep sleep on or off

Analog Input Settings, where user can choose analog input range 10 V or 30 V,
depending on needed accuracy (lower range gives higher accuracy of
measurements), and input voltage

Object Motion Detection Settings, where user can configure 3 ways how FM1100
will detect stopped movement, and change its working mode (for working modes,
read section 5.14)

Static navigation settings, where user can turn static navigation on or off
Stop Detection
Source
Vehicle on Stop mode Vehicle Moving mode
Ignition
(recommended) If ignition (DIN1) is logic low If ignition (DIN1) is logic high
Msensor (movement
sensor) Internal movement sensor does
not detect movement Internal movement sensor detects
movement
GPS GPS fix is available and vehicle
speed is lower than 5 km/h GPS fix is available and vehicle
speed is higher than 5 km/h
While GPS fix is unavailable, Object Motion Detection Settings are
working like in Msensor mode
Static Navigation Mode is a filter, which filters out track jumps when the object is
stationary. If Static navigation filter is disabled, it will apply no changes on GPS data. If Static
navigation filter is enabled, it will filter changes in GPS position if no movement is detected
(depends on Object Motion Detection Settings). It allows filtering GPS jumps when object is
parked (is not moving) and GPS position is still traced.
Figure 24 System settings configuration
5.10 Records settings
Here user can modify if FM1100 device will send newest records first, meaning, that the
most important thing is to know recent position of car, older records are being sent right after
newest records arrive to AVL application.