TELOS 2101 USER’S MANUAL
PART IV
THE STUDIO INTERFACE & ADDITIONAL HYBRIDS
IV-30
SECTION 1 – STUDIO INTERFACE INSTALLATION
1.4.5
AES/EBU
Digital Audio In/Out
OUT
IN
AES/EBU
PIN
FUNCTION
1
Ground
2 Output
+
3
Output 0
AES/EBU Input & Output Connections
These are inputs and outputs for AES/EBU format digital audio signals.
Input
110
Ω
. This input is internally sample-rate converted, so may accept sources at any
of the common rates, from 32 to 48 kHz. See section 3.3.1 for setting this parameter.
The left input of this AES/EBU stream will be fed to Hybrid 1, while the right input
will be fed to Hybrid 2 (the internal routing of these two signals can be changed
using the Routing option in the Audio menu). Because of this fact you may need an
external AES/EBU router or combiner to provide this stream. An alternative would
be to use a routing option requiring only a single mix-minus (see Routing in Section
7.3.1) or the analog inputs.
Such combiners are available from several suppliers, such as:
Sonifex (
www.sonifex.co.uk/technical/brochures/
See # RB-SP1 under “Redbox”)
Nvision (
800-719-1900 or 530-265-1021, See # NV1055).
h
HOT TIP!
The signal fed to these inputs should be a mix- minus or system performance will be
severely degraded.
See section 1.4.1 for details on mix- minus.
