FlexSym-ONT205-Installation-Guide
Page 8 of 38
Ethernet Features
PoE has the capability of delivering 48 VDC over the same copper cable as Ethernet data
and provides up to 140 W of power for PoE-powered devices (PDs) when the ONT180C
is powered by the AC adapter.
•
PoE: 802.3af/at, class 0-4, up to 30W per port on all ports
•
PoE: Cisco UPoE Support with up to 60W on 3 high power ports.
•
PoE: 802.3bt 4PPoE class 4, up to 60W per port on 3 high power ports.
•
IEEE 802.1x Port-Based Authentication/MAB
•
Network Access Control (NAC)
•
Virtual switch based on 802.1Q VLAN
•
1024 MAC addresses
•
25 VLANs per Ethernet port
•
VLAN tagging/detagging, marking/remarking per Ethernet port
•
VLAN translation, trunking and stacking
•
QoS and security policies based on VLAN-ID, 802.1p, DSCP
•
MAC address limiting to prevent flooding attacks and limiting the number of
devices attached to a port
•
IPv6 capable for enterprise services
•
L2-L4 Access Control Lists (ACLs)
•
Upstream ACL rate limiting
•
Supports Dante and CobraNet digital audio systems over IP
•
IGMP v2/v3 snooping
•
Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power
management.
